Those boys know how to build a track

That may have been the most technically challenging and physically demanding ride of my life. 

Nompa at Aston Hill

The Nompa 2.2 did well, twisting and turning in all the right places but wet clay on top of chalk on top of a stupidly steep and narrow mountain bike track in the dark makes for one hell of a ride. But I got what I wanted. Sitting here all alone in the dark woods, I feel… at peace.

Which way to turn

Heel-side, toe-side, front-side, back-side? Turns, spins, slides, rails? Which way round? I’m confused. I need some clarity.

Let’s start with why we can’t just use left and right. Obviously really. Since we stand sideways on our boards, left and right would correspond to the front and rear of the board, which isn’t very helpful, especially as some riders are regular and some are goofy. So we can’t use left and right to describe direction changes on a board, hence the whole heel-side, toe-side, front-side, back-side thing.

OK, let’s think about toe-side and heel-side. Obviously this comes from snowboarding where being able to tell one edge from the other would be useful.But we don’t really have edges on mountainboards so toe-side and heel-side got mutated into defining which way the rider was turning and gave us toe-side turns and heel-side turns.

Then mountainboarders started getting air and so continuing to use toe-side and heel-side to describe the spins didn’t really work. Front-side and back-side makes more sense. All the other boardsports use these terms to describe the direction of the spin so it was natural that mountainboarding would adopt them too.

But now we’re left with the remnants of both these ways and the confusion that comes from not really being sure which term works in what context.

I’m going to stop using toe-side and heel-side. I can see how they work to describe turns but since mountainboarding involves more than just turns and I want a clearer means of describing everything, it seems the best way to go.

So we’re left with Front-side and Back-side. They work fine for rotations (Back-side 360), and rails (Front-side board slide) as they describe how the rider is approaching the feature (kicker, quarterpipe, rail). But does it work for turns, slides and scrubbing? Well, yes it does, if you use the idea of ‘approach’ to explain whether a manoeuvre is Front-side or Back-side.

Turns first. What used to be called a Toe-side turn is now a Back-side turn as it tells us that the rider is approaching the slope with their back, just as they would approach the lip of a kicker if they were doing a Back-side rotation. And so a Heel-side turn is now a Front-side turn as the rider is approaching the slope with the front of their body.

This idea of using how the rider is approaching the slope makes slides a bit easier to understand too. The usual ‘powerslide’ of grabbing between your toes and turning on your heels sharply is, by this new definition, a Front-side Slide as the rider is facing the direction in which they are sliding.

Now scrubbing. Same thing really. If you’re scrubbing on your heels, that is a Front-side Scrub as you are turning like you would if you were doing a Front-side 180 and you are facing the apex of the turn.

So, that’s it. No more Toe-side and Heel-side, Just Front-side and Back-side to explain it all.

Modelling tracks or just playing with play-doh?

I’ve been experimenting with modelling boarderX track features in play-doh to help me understand how they should be built correctly, and seeing how we can put a bit of science into feature design rather than track-builders always having to make it up as they go along.

Roller – 1:7 ratio sine wave
Roller – 1:7 ratio sine wave
Roller – 1:7 ratio sine wave
Berm – width to height ratio 2:1
Berm – Not much science, just thinking about an Euler spiral for the track transition curve
Berm – Not much science, just thinking about an Euler spiral for the track transition curve
Berm – width to height ratio 2:1, starting to use Euler spiral to create transition between berm and track.
Berm – width to height ratio 2:1, starting to use Euler spiral to create transition between berm and track.

Dinking off a nubbin on a nompa

Freeriding

The Remolition traditional new years day ride was pretty cool. Got to ride with a good bunch of people from as far away as Worcester and Peterbrough, on the best freeride terrain in the country, on my new board, wearing my new helmet. If you weren’t there, you should’ve been.

Macc Attack

Macclesfield Forest

Sixty eight wheels, getting cold, dodging horse phlegm, running over little dogs, smashing hubs, smashing knee pads, sessioning s bends, fixing bindings with padded shorts drawcord, and not sliding nompas. Just another day at Macclesfield Forest.

Must try harder

Nompa in leaves

Took the Nompa for a test ride. Turns out the alloy trucks give it a really short wheel base which gives the board a really low inherent stability and means you can’t rely on it to hold you up. But it is really really agile. So even though I fell over the back a few times, I think it has potential.

One day, five Passes and a van load of mountainboarders

Brakeboards
The boards: three nosnos, two trampas, one mbs, and one no-tramp.

Roger Swannell reports on an epic downhill challenge for 7 eager road-riders that took place in The Lake District in November ’11…

“Why do you want to climb Mount Everest?”, asked the reporter. “Because it’s there”, retorted Mallory, way back in the early ‘20’s.

The idea of the ‘challenge’, born in mountaineering, and quickly spreading to other sports like fell running, hiking & mountain biking, and then becoming the focus of charity fund-raising events like the Three Peaks Challenge, has now found it’s way into mountainboarding.

Starting, as these things often do, as a ‘we should do this’ kinda discussion on SurfingDirt Forum, the date was set, the maps printed, the accommodation booked, and the Five Passes Challenge was ready to go. We all piled in the car and headed up the M6, driving like James Bond in Octopussy, to arrive at the bottom of the first Pass.

Good to go.

Whinlatter

Whinlatter pass map


Nice easy warm up. The road is two lanes all the way down so there is plenty of room for cars coming up. Nothing broken, but Brennigs wheel fell off. We gave it a score of 4/10 as it’s not too challenging but good to start with.

Honister

Honister pass map


Starts out steep, with some tight chicanes, before mellowing out a bit. It was nice to get some thumbs up from vintage car rally drivers as we shot past them. And Chris’ flaming brake blocks gave us a reality check about what we were doing (but didn’t stop us). This one scores 8/10 for the super fast start and stunning scenery.

Two runs down, three to go

Wrynose

The sun was starting to set as we headed up the third Pass on our list. The run down was long, smooth and fast, giving us more melted brake blocks. Wrynose also gets a score of 8/10 for it’s openness, speed, sheer drops, and worryingly close passing cars that wouldn’t slow down for us.

The riders: Dave ‘No Sleep Till Brooklyn’ McBean, Brenning ‘Bat Out Of Hell’ Hughes, Allan ’12 Inches’ Grey, Chris ‘Charles Bronson’ Bensted, Travis ‘Wizard of Oz’ Birdsall, Ian ‘Mash-up Master’ Hufton, Roger ‘Invisible Man’ Swannell

Hardknott


It hadn’t got any lighter as Allan wheel-spun his van up Hardknott Pass with the rest of us in the back, not being able to see the road and not knowing what to expect on the run down. This is the steepest of the passes with hairpin after hairpin making it difficult to pick up any speed. We gave it 5/10 because although it’s steep, you can’t let it go and pick up too much speed before you’re slamming into the next corner.

Cumbria at night

Kirkstone

Kirkstone pass map

The last Pass, also in total darkness, was the highest. After Hardknott it seemed a bit mellow but we gave it a score of 8/10 as it’s long, fast, and finishes at the car park a short walk from the town centre.

————————————

After the riding was done, we went to an eastern European chip shop for dinner where the ladies behind the counter took a shine to Brennig, not only did he get table service but he even got a knife. We also had a great idea for a one-stop-shop where you could get therapy, have your teeth polished and rent a car. It would be called ‘Mental Dental Rental’.

A long drive down narrow country lanes took us us to the barn we’d booked to stay in for the night. We wondered around aimlessly in the dark for a bit before finding a room with a pile of mattresses. That can’t be it, we thought, and carried on looking, only to find another door with our name on, opened it to find the same room from the other end. Now we know where the expression ‘born in a barn’ comes from, didn’t matter whether the door was open or closed.

All-in-all, it was an awesome trip with a great group of riders. Its good to see more brake riders out there, and see collectives like this coming together from all over the country to ride some of the most awesome roads in the country, with the added degree of setting ourselves the challenge of getting them all done in a day. MVP of the trip has to be Brennig who was uncatchable and did it all with the nonchalance of someone with a great future in downhilling ahead of them…

So, next challenge? !

Originally published on Remolition

Freeriding is an old man’s game

We had fifteen mountainboarders riding at Randwick today, and although you might not have guessed it from the stick fighting, most of them were ‘Masters’, which you can read as ‘mature’, or just plain old. There were a few youngsters, but freeriding definitely seems to appeal to the more mature gentleman. Maybe it’s all part of a nice walk in woods on a autumn afternoon. And maybe it’s not for the majority of younger riders as it involves a lot of walking, and teenagers are lazy.

Anyway, we all seemed to have a good time, and it was great to see some old faces out riding again. Tim was back after a long time out due to injury and sports cars. Jon and Sam were back after months of hiking up mountains without a board to ride back down. Beiran was out on his flexi axles. And Horse tried out the new Trampa Brakeboard and got on really well with it. The twist in the Trampa deck and easy-to-grab stopping switch go together to give you a board that is pretty much perfect for freeriding. It sticks to the rough terrain, is pretty much indestructible, not too heavy for carrying back up, and as the brake works with eight inch wheels, it’s really versatile.

Don’t know why Trampa chase after the freestyle market. MBS have that pretty much sewn up and the growing demographic is the freeriders, which, as today showed, are in the upper age bracket, smart enough to choose a board that is the right tool for the job rather than one that looks pretty, and may want a brake to give them the added safety factor (A.K.A. paying the mortgage).

Seeing this many mountainboarders out together at the beginning of the freeride season (yes, I know every season is freeride season for some of us), always gives me hope for good times ahead, and shuts up those who moan about how mountainboarding is shrinking.

Old men freeriding

For more photos of what old men get up to in the woods, check out Nathan’s Facebook Album.

I’m up in the Lake District next weekend so our next Freeride Meet is Kings Wood on the 20th Nov. And while you’re on Facebook, check out the SurfingDirt page and like our Pumpkin Peril pic because we want to win. (Befriending Surfingdirt maybe required, but that’s not a bad thing). No terms and conditions apply.